Redfoot Levelling Renault ‘AutoLift’ System
Custom designed solutions for all Renault Master Motorhomes
Most advanced levelling solution on the road today!
The Redfoot Renault AutoLift Levelling solutions are custom designed for your Renault Master Motorhome. Redfoot have done all the work for you. By custom designed we mean the Redfoot Renault AutoLift Levelling systems include:
1. Custom Brackets that are designed specifically to facilitate the easy attachment of the power jacks to the Renault Chassis. No welding required!
2. Custom Designed pre-wired harnessed control box that connects to each powered jack, auxillary battery and keypad panel.
3. Four Custom Designed powered jacks that mechanically retract into the horizontal position while travelling, maximising your undercarriage clearance.
4. Each Powered Jack can be adjusted by using the custom designed extender spacers provided. Making any height variables acheiveable.
5. Custom Bolt sets that facilitate perfect alignment of all systems parts
In addition to these custom designed features, all Redfoot Renault AutoLift Levelling systems come with:
• Redfoot AutoLift Keypad control panel
• Complete with manual override operation
• All required harnesses and connector terminals
• 4 stabiliser pads and placement and retrieve pole
• Includes RF Remote Control for basic functions
The Redfoot Renault AutoLift Levelling Systems allow you to ‘Auto Level’ and ‘All Retract’ the jacks using the Remote Control keypad.
This is the industry’s new standard and it has changed the way leveling is done. Redfoot AutoLift levelling system allows you to level your Renault Master motorhome by using the automatic one touch operation button, levelling your motorhome in less than two minutes.
This sequential leveling is a patented process that provides a more precise level throughout the length of the vehicle, adding stability to the vehicle while leveling it as low to the ground as possible. It is quick, easy and on the level!
Check out these benefits of the Redfoot Renault Master AutoLift Levelling System:
• One touch, push button Auto-Level operation
• Prevents vehicle rocking and motion
• 4x included stabiliser pads to prevent sinking
• Simple plug and play wiring installation
• Reduces levelling time
• Huge lifting capacity up to 6 ton and a system weight of only 63kg
• One push button ‘All – Retract’ feature
• Remote Radio Frequency operation
• Auto level display panel
• Audible and visual prompts notify user when levelling is in progress and complete
• Stow legs quickly and easily
• Standard with manual override
It is no wonder the Redfoot AutoLift Levelling System has quickly become the number one choice for Renault Master Owners. The automatic, one touch operation levels a Renault motorhome in less than two minutes, operating each leg independently in a sequential process.
Renault Master Motorhomes in Australia can come in many different configurations. When selecting a levelling system for your Renault Master Motorhome it is important to know the under chassis to ground clearance.
To qualify if your vehicle is suitable, you will need know if you have enough under chassis to ground clearance. The minimum under chassis to ground clearance required is 340mm, if this is not achieved then the vehicle will require a suspension upgrade. Don’t be too concerned as this can be also accommodated prior to installation of the AutoLift system for a small fee. Once you have measured your clearance of more than 340mm, the next step is to look for any obstruction between the chassis rail, directly behind the rear axle. If there is a spare tyre or water tank impeding the location of the rear jacks then the Redfoot AutoLift system will require the individual bracket option for your installation.
Choosing the custom Redfoot Renault Master AutoLift levelling system is as easy as 1,2,3,4.
Step 1. Determine the Vehicle Make and Chassis Model. E.g Renault Master.
Step 2. Measure the under chassis to ground clearance of more than 340mm as shown below.
Renault Master front passenger location:
Renault Master measurement front passenger location:
Renault Master front driverside location:
Step 3. Once clearance is achieved, check for any existing obstructions between the chassis rail, directly behind the rear axle. If there is existing obstructions between the chassis rail directly behind the rear axle, then you will need to order the kit option with individual rear brackets (Renault Master – Single-B), rather than the standard rear cross member bracket kit (Renault Master -Cross-B).
Step 4. Now compile your results from steps 1, 2 and 3 and select the appropriate Redfoot System based on the option selection drop downs above. E.g. Renault Master – Cross-B OR Renault Master – Single-B.
Please do not hesitate to contact us if you need further clarification or confirmation of the custom solution for your Renault Motorhome.
Investing in a Redfoot Renault Master AufoLift Levelling system will bring years of added enjoyment and improved lifestyle with your Renault Motorhome. The system prices are set out above. In addition to the system prices will be freight and that depends on where you live but generally ranges between $80 to $150. The Redfoot systems are delivered in environmentally friendly packaging that is boxed an placed on a skid (half pallet). This ensures every system is well protected during shipping.
The Redfoot systems can be DIY installed provided there is a good level of mechanical skills available, and access to a mechanical workshop with suitable hoists. We provide a comprehensive installation manual.
We recommend the installation is done by one of our approved installers. Not all installations are the same so a solid level of mechanical knowledge is required. Installation costs range from $1,100 at the low end and up to $1,600 at the high end. The reason they have a range is firstly because different installers have different cost structures, e.g. Sydney costsrent versus say more country areas where costs can be lower. Secondly, not all installations are the same. For example there can be existing obstructions such as water tanks, plumbing or spare tyres. In this case they maybe extra works required to accomodate these variations. Best thing is to talk with your installer about the installation costs upon inspection or prior to quoting the job.
AutoLift IGNITION ON Alarm
AutoLift 'GET UP' Stowing the jacks process using keypad in less then 1 minute
AutoLift - How to Auto Level using keypad in just over 1 minute
AutoLift 'GET UP' Stow away mode
AutoLift 'START' and 'AUTO' Mode levelling
AutoLift Front Jacks 'GET UP' Stow away mode
AUTOLIFT front jacks 'START' Mode
Have a Question
Call us on 07 3286 1199. We are here for you and can assist in any way possible.